|
|
|
|
|
| products: |
|
MTD BE |
|
Leaflets:
MTD BE
Manuals:
MTD BE
Rear view BD
|
MTD User Consoles and Operational Displays TCU |
MTD user consoles always comprise of a MTD display with LTC reader and serial interface RS485 as well as a corresponding keypad. MTD display's and keypad's may be combined together into a user console, or the keypad may be connected via a cable to the display (operational display). MTD user consoles are easy to operate. Their flexibility and wide variety of functions are realized through three installation levels:
Access rights: It is possible to define for every operational unit which times can be accessed, only displayed, or not available at all.
TCU 1RU
Function selection: There are many functions available for the assignment of the function keys of the operational unit. For eg. counter up; counter down; simultaneous operation of counter down, up and final time, offset versus real time, offset versus LTC, difference versus real time, difference versus LTC or simultaneous operation of several timers.
Time display The following functions may be selected for every time: 8 different time formats; leading zeroes ON/OFF; leading zeroes at zero transition ON/OFF; overflow at DOWN ON/OFF; flashing in case of negative times ON/OFF; separation by colon or decimal point.
The installation may be changed whenever required
Product Information:
| User Consoles | Operational Displays | ||||||
| TCU | . | MTD BE19 | MTD BD25 R/G/Y 6 | MTD BD25 R/G/Y 7 | MTD BD56 R/G/Y 6 | MTD BD56 R/G/Y 7 | |
| Description | operational unit with keypad and display | . | built-in operational unit with keypad and display | operational display 25 mm | operational display 56 mm | ||
| Buttons | 19 | . | 24 | ./. | |||
| Digits | 7-segment LEDs | ||||||
| Number of digits | 7 | 6 | 7 | 6 | 7 | ||
| Digit colour | red | red or green or yellow | |||||
| Brightness adjustable | 7 grades | ||||||
| Times selectable: | local timer, real time, date, LTC time, installation mode, MTD times A-F (timer) | ||||||
| Including: | operating instructions | ||||||
| power supply unit | mains cable | power supply unit | mains cable | ||||
| . | mounting angles (on request) | ||||||
| Options | . | MTD BT (4 buttons in Danner cassette 95x40mm, cable) | |||||
| . | MTD BTK (20 buttons in Danner cass., 1/2 19" 1RU) | ||||||
Specifications:
| User Consoles | Operational Displays | ||||||
| TCU | . | MTD BE19 | MTD BD25 R/G/Y 6 | MTD BD25 R/G/Y 7 | MTD BD56 R/G/Y 6 | MTD BD56 R/G/Y 7 | |
| Width | . | . | 445mm | 1/2 19" | 19" | ||
| Height | . | . | 88.5 mm | 1 U | 2 U | ||
| Depth | . | . | 127mm | 143 mm | |||
| Weight | . | 1.8 kg | . | approx. 1.5 kg | |||
| Power supply | . | 100-240 VAC, 50/60Hz | . | 100-240 VAC, 50/60Hz | |||
| Power consumption | . | typ. 9W, max 12W | . | 500 mA | typ. 11W, max 16W | ||
| Operating temperature | 5° C to 40° C | ||||||
| Relative humidity of air | 35 % to 85 % | ||||||
| Connections: | |||||||
| Power In | ./. | XLR 4 M | mains plug | ||||
| LTC In | ./. | XLR 3 F // 60 mV - 5 V / balanced / 20-34 frames/sec. | |||||
| Data In | . | DSUB9M // LTC+RS485 | DSUB9M // LTC + RS485 | ||||
| LTC Out | ./. | XLR 3 M // loop-through of LTC In | |||||
| Data Out | . | DSUB9F // loop-through of Data In | |||||
| Mode | . | hexadec. turn switch // front | |||||
| Brightness | . | BCD // front | |||||
| BT/BTK connector | . | DSUB9M // KEY | |||||
We reserve the right to modify specifications without notice.
© Alpermann+Velte 1996 - 2011; January 14, 2011