Abstand
Deutsch
Home
About us
Sitemap
Products
Service
Projects
FAQ
Sales
Imprint
Email










products GB module Alpermann+Velte

Leaflets:

PDF-document GB module


Manuals:

PDF-document GB module



Housing
H1 modules, 19" 1 RU housing



GB module Master Blackburst Generator


Features
Highly accurate analog Blackburst generation (PAL/NTSC)
Two Blackburst outputs
Internal reference oscillator
Synchronizes to 10 MHz
Synchronizes to video
SNMP functionalities
VITCgenerator


The GB module of the RUBIDIUM Series serves as a versatile master Blackburst generator.

Gen-locked to a system reference, the GB module delivers Blackburst signals in a highly accurate manner. With the included input and output connections the unit was intended for a standalone functionality, or as a componenent of a comprehensive generator system.

The GB’s main task is controlling external SPGs with the aid of GPS and 10 MHz signals.

That way, in addition to the Timecode, Wordclock, and NTP reference signals, the RUBIDIUM System can provide Blackburst from a single source as well.

GB Front
front view RUB1 GB


GB rear
rear view RUB1 GB


Circuit diagram

Circuit diagram small

redundant SPGs controlled by the GB module
bound to GPS and 10 MHz


Typical applications for the professional use are e.g.:

Synchronizing redundant studio SPGs with analog video
In case of a signal loss, redundant SPGs automatically changeover the video channel. While being synchronized to a 10MHz pulse, this can cause image interferences. Those interferences could be avoided if the generator system got feeded by Blackburst. That way the picture phase would be synchronized as well.

Securing the video distribution in case of a signal loss
The GB module will still generate highly accurate Blackburst, even if a signal loss occurs. The reference can be a 10MHz PPS pulse, or analog video.

Generating Blackburst with a compact system
As a self-contained, compact generator system, one or several GB modules can be used in a mobile way during your production.

RUBIDIUM GB module in H1 housing
RUBIDIUM GB module in H1 housing

Configuration and software updates are done using the USB or DSUB port at the back of the housing by default.

In conjunction with an IE module, all adjustments can be dealt with via a standard web browser. That way SNMP functionalities and status monitoring are activated as well.

The four front buttons of the module are freely programmable. Different profiles, e.g., can comfortably be selected by the push of a button.


GB Config1

GB Config2


GB Draw rear


GB Draw H3 rear

GB specifications

Sync
Connector
BNC (IEC169-8), 75 Ω
Sync: Signal Input = Video
Format
CVBS analoge video signal: PAL 625/50, NTSC 525/60, 480 i/p 576 i/p, 720 p, 1080 i/p, bi-level and tri-level sync signals
Signal level
1V ± 6 dB
Sync: Signal Input = 10 MHz
Format
10 MHz, sinusoidal
Signal level
0,8-5 Vpp
Video output 1+2
Connector
BNC (IEC169-8), 75 Ω
Output impedance
75 Ω
Format
PAL 625/50, with or without 8 Field Ident Pulse at line 7
NTSC 525/60
Signal level
1V ± 2%
8 Field Ident Pulse
Identifies the 8 field sequence in the video system PAL 625/50
Can be switched off.
Level: 100% white
Width: 20 µs
Start: 12 µs after horizontal reference
PPS IN
Connector
Pin RJ45 REF and LOOP
Characteristic
Typical input signal: 5V impulse
Input impedance: 100 kΩ
Input “Low”: -2,0 to 1,7V
Input “High”: +2,8 to +12,0V
RXD IN
Connector
Pin 2 RJ45 REF and LOOP
Characteristic
Typical input signal: RS232
Input impedance: 30 kΩ


Others
Operating voltage
12 - 30 VDC
Power Consumption
Max. 4 W
Weight
0.28 kg approx.
Dimensions
2 circuit boards (WxD) 100 x 160 mm/3.94 x 6.30 inch
Rear panel RUB1: 103 x 44 mm/4.06 x 1.73 inch
Rear Panel RUB 3: 8HP, 3RU
Enviromental characteristics, operating
Temp.: 5°C-40°C, relative humidity: 30%-85% non condensing
Enviromental characteristics, non operating
Temp.: -10°C-+60°C, relative humidity: 5%-95% non condensing


Product ordering ID GB modules
RUB 1 GB
Blackburst module for RUBIDIUM Series 1 (1 RU)
RUB 3 GB
Blackburst module for RUBIDIUM Series 3 (3 RU)



The RUBIDIUM modules must be used in conjunction with aRUBIDIUM housing and a RUBIDIUM power supply, please see our overview leaflet for more information.

We reserve the right to modify specifications without notice.

Erde
Abstand

Deutsch | Home | About us | Sitemap | Products | Service | Projects | FAQ | Sales | Imprint | Contact us



© Alpermann+Velte 1996 - 2011; December 02, 2011